Gas burnersIgniter and Spark Module Faults
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
- Igniter electrode and ceramic insulator inspection
- Valve switch and harness continuity test
- Spark module output check and replacement
Flame qualityWeak, Yellow or Lifting Flames
A healthy flame is crisp and blue. Yellow tips, lazy flames or flames that lift off the ports point to clogged burner ports, a misaligned burner cap, a dirty orifice or a regulator problem. The pro clears the ports, reseats the cap and head, and checks pressure with a manometer.
- Burner port and orifice cleaning
- Cap and head alignment on sealed burners
- Regulator and manifold pressure test
Electric coilCoil Elements, Receptacles and Switches
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
- Element resistance test
- Burner receptacle and terminal replacement
- Infinite switch diagnosis
Smooth-topRadiant Elements and Glass Tops
Glass ceramic cooktops hide radiant elements and a limiter under the surface. A zone that stays dark, a hot-surface light that never goes out, or a cracked or crazed top all need a pro, and a cracked top should not be used until it is replaced.
- Radiant element and limiter testing
- Hot-surface light and sensor checks
- Cracked or crazed glass top replacement
InductionInduction Cooktop Errors
Blinking codes, a zone that will not detect the pan, or a cooktop that shuts down mid-boil are classic induction calls. The technician checks the cooling fan, generator board and coil connections with the service manual open.
- Error code lookup and cookware check
- Cooling fan and airflow inspection
- Power or generator board diagnosis
Controls and fitKnobs, Valves, Conversions and Tip Safety
Stripped knobs, stiff valve stems and gas valves that leak by are common on busy kitchens. The pros also convert cooktops between natural gas and LP orifices and install the anti-tip bracket that keeps a freestanding range from tipping onto a child.
- Knob and valve stem replacement
- Natural gas to LP orifice conversion
- Anti-tip bracket installation